How to Hotwire a Bird Scooter? (Step-By-Step Easy Guide)


how to hotwire a bird scooter

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

How to Hotwire a Bird Scooter? Hotwiring a Bird scooter is a fairly simple process. First, locate the battery on the scooter. It is typically in the rear-center of the vehicle.

Next, locate the connector near the battery. The connector will be a black box with two metal prongs.

Finally, use a metal object, such as a paperclip, to short the two prongs together. This will create an electrical current that will start the scooter.

If you’re looking for a quick and easy way to get around your city, you should consider using a Bird scooter. These scooters are becoming increasingly popular, and they can be a lot of fun to ride.

However, some people may not want to pay the $1 rental fee. If that’s you, then keep reading! In this blog post, we will teach you how to hotwire a Bird scooter for free.

What is a Bird Scooter?

A Bird scooter is a small, electric scooter designed for short-distance travel. They are becoming increasingly popular in cities as an alternative to cars and public transportation.

More: Do Scooter Batteries Recharge Themselves?

Hotwiring a Bird Scooter:

Hotwiring a Bird scooter is relatively simple and only requires a few tools. The first step is to remove the battery cover.

This can be done by unscrewing the bolts on the bottom of the scooter with a Phillips head screwdriver. Once the cover is off, you will see the battery pack and wires.

The next step is to locate the positive and negative terminals on the battery pack. The positive terminal will have a red wire connected to it, while the negative terminal will have a black wire connected to it.

Once you have located the terminals, you will need to connect the positive wire to the negative terminal and vice versa.

Now that the wires are connected, you can screw the battery cover back on and replace the bolts. Once everything is tightened back up, your Bird scooter should be ready to go! Just press the power button and enjoy your ride.

Keep in mind that hotwiring a Bird scooter is technically illegal, so do so at your own risk. Also, be sure to wear gloves and eye protection when working with electrical wires. Safety first!

More: Are Scooters Safer Than Motorcycles?

How to Hotwire a Bird Scooter?

It’s really quite simple. Just follow these steps and you’ll have your Bird up and running in no time:

First, find the scooter’s battery. This is usually located under the seat. Once you’ve found it, remove the cover.

Next, locate the main power cable. This will be a thick red wire. Carefully disconnect it from the battery.

Now that the power cable is disconnected, you can touch it to any metal surface on the scooter to create a circuit. This will cause the scooter to start up.

And that’s all there is to hotwiring a Bird scooter! Just remember to reconnect the power cable when you’re done.

More: Are Scooters Safe?

Why Would You Want To Hotwire Your Scooter?

How to hotwire a scooter? Well, maybe you lost your key, or maybe you’re just trying to be a rebel. Whatever the reason, hotwiring a Bird scooter is actually pretty easy. Here’s how you do it:

First, find the black box on the back of the scooter. It should be near the rear tire. Once you’ve found it, open up the box and locate the wires inside. There will be three wires: red, green, and yellow.

Next, take a small screwdriver and insert it into the slot next to the green wire. Once you’ve done that, twist the screwdriver until you hear a clicking sound. This means that you’ve successfully disengaged the safety mechanism.

More: How Do Scooter Tricks?

The Process Of How To Hotwire A Bird Scooter:

  • First, find the black box on the scooter. It will be located under the seat.
  • Next, open the box and remove the battery.
  • Then, locate the wires that connect to the battery. These will be red and black.
  • Use a screwdriver to loosen the screws that hold these wires in place.
  • Finally, twist the two wires together and replace the battery in the black box. The scooter should now be operational. Enjoy your free ride! Just remember to return the scooter to its original location when you’re finished.

How Do You Hotwire A Bird Electric Scooter?

Here’s a step-by-step guide:

  1. First, find the Bird electric scooter that you want to hotwire. If the scooter is locked, you’ll need to find a way to unlock it.
  2. Next, locate the battery pack on the scooter. This is usually located under the seat. Once you’ve found the battery pack, open it up and remove the wires.
  3. Now, you’ll need to connect the positive and negative wires together. You can do this by using a piece of metal or by using jumper cables.
  4. Once the wires are connected, turn on the power switch on the battery pack. The scooter should now be operational!

How To Hot Wire A Bird Electric Scooter In Order For It To Operate?

It looks like you’re planning on stealing a scooter from Bird.

The company has an app where users can register their means of payment, unlock the bikes with that information once they’ve been rented out and located within close proximity to one another through GPS tracking systems.

So not really efficient or legal if we hope for anything ethical here! But fair play does have its limits I guess.

How To Hotwire A Spin Scooter?

Here are simple steps to hotwire an electric scooter or spin scooter? To begin hotwiring a Spin scooter, locate the battery compartment under the footrest. Remove the screws securing it using a screwdriver.

Take off the cover to reveal two wires that are connected to the battery. Strip away some of the insulation from both wires so that they are exposed.

Next, twist together both wires tightly until you see sparks flying or hear clicking sounds coming from under your seat.

This indicates that you have successfully bypassed the ignition system and created an electrical connection between your battery and motor.

How Do I Hot Wire An Electric Scooter Without A Control Board?

You can’t go fast if you want to stay alive. 

If 250W 15½mph(25k) brushed, then connect battery and make sure it’s geared up properly before connecting motor or else there will be some serious consequences!

You might think that turning off at the back is safe but what about when your chair locks into place?

Bottom Line: How to Hotwire a Bird Scooter?

How to Hotwire a Bird Scooter? Hotwiring a Bird scooter is not only illegal but also puts yourself and others in danger.

It is important to use the scooters properly by renting them through the app and following the rules of the road.

Attempting to tamper with the scooter’s technology can result in injury or damage to property. By using the scooters responsibly, we can continue to enjoy this convenient and eco-friendly mode of transportation.

Let us all do our part in keeping our communities safe and respecting the shared resources available to us.


What is hotwiring a Bird scooter?

Hotwiring a Bird scooter is a method of bypassing the electronic lock on the scooter to gain access to the battery and other components.

Is hotwiring a Bird scooter legal?

No, hotwiring a Bird scooter is not legal and can result in fines or other legal action.

How do I hotwire a Bird scooter?

Hotwiring a Bird scooter involves bypassing the electronic lock on the scooter by cutting the wires and connecting them to the battery.
This should only be attempted by experienced individuals with knowledge of electronics.

What tools do I need to hotwire a Bird scooter?

In order to hotwire a Bird scooter, you will need a pair of wire cutters and a pair of pliers.

What are the risks of hotwiring a Bird scooter?

Hotwiring a Bird scooter can be dangerous and can result in serious injury or damage to the scooter. It is important to follow safety instructions and proceed with caution.

About the author

Latest posts