How To Fold Gotrax Scooter? (Just 5 Simple Steps!)

How To Fold Gotrax Scooter? To start, step on the footplate, firmly press down on the handlebar, and then pull up on the folding latch located in the middle of the handlebar. This will cause the scooter to fold in half.

Then, grab hold of the folding latch at the bottom of the scooter and pull it up until it clicks into place. This will ensure that your Gotrax scooter is firmly locked in its folded position.

After that, you can easily carry your scooter by its handlebar or use the shoulder strap for easy portability.

Folding and carrying a scooter can be a daunting task without the right instructions. However, there is no need to worry as the Gotrax scooter is designed to make it easy for anyone to fold and carry their electric scooter.

This article will provide detailed instructions on how to properly fold and store your Gotrax scooter in just a few simple steps.

How To Fold Gotrax Scooter?

Folding and transporting your Gotrax scooter is a breeze! With just a few simple steps, you can quickly and easily fold the scooter down to a compact size so you can take it wherever your adventures take you.

With these simple instructions, you can get the most out of your Gotrax scooter and take it anywhere!

Important Note:

To begin, the user must first disengage the locking mechanism located at the stem of the scooter and pull up on the handlebar. This will activate the folding function and cause both sides of the deck to be connected together via a hinge mechanism.

Here are simple steps to fold your Gotrax scooter:

1: Turn Off Your E-scooter

To turn off your e-scooter: First, locate the power button, typically located on the handlebars. Press and hold the power button for several seconds until the scooter powers off.

You should hear an audible sound when the scooter turns off, usually a beep or click.

After powering off your e-scooter, it is important to remove the key from the ignition to prevent the scooter from being accidentally started.

2: Now Release The Folding Mechanism And Safety Pin

Now that your e-scooter is powered down, it is time to release the folding mechanism and safety pin. To do this, first locate the small safety pin located in the middle of the handlebar.

This safety pin should be snapped into place when you folded your scooter and should not be loosened.

Once you have located the safety pin, release it by gently pulling on it until it pops out of the handlebar.

Next, locate the folding mechanism located in the middle of the handlebar. This mechanism will automatically unfold your scooter when you pull up on it, so don’t worry about trying to fold it yourself.

Simply release the folding mechanism by gently pulling on it until it clicks into place. After releasing both these items, be sure to store them away safely so they do not get lost or damaged.

3: Place Your Foot On The Rear Fender And Push Down

Now that your scooter is folded, its time to place your foot on the rear fender and push down. This will cause the scooter to fold in half again.

Be sure to place your foot on the fender in a secure location so you do not trip while folding or transporting your scooter.

After pushing down on the footplate, grab hold of the handlebar and pull up until the folding latch located in the middle of the handlebar clicks into place. This will ensure that your scooter is firmly locked in its folded position.

4: Fold The Handlebars

Now that your scooter is folded, its time to fold the handlebars. This can be done in one of two ways: by pulling up on the handlebar the same way you pushed it down when folding the scooter or by using the folding latch located in the middle of the handlebar.

Whichever method you choose, be sure to hold onto the handlebar as you do so in order to prevent it from falling apart.

After folding the handlebars, be sure to store them away safely so they do not get lost or damaged.

5: Fold In Half From The Bottom:

Before folding your scooter, be sure to remove the key from the ignition. To do this, access the keyhole located on the bottom of the scooter. After removing the key, fold your scooter in half from the bottom and store it away safely.

Rotate The Scooter So That The Wheels Are Facing Down

When folding your scooter, be sure to rotate the scooter so that the wheels are facing down. This will help protect them from getting damaged when not in use.

Place Your Hand Under One Of The Wheels And Pull It Outwards: When folding your scooter, be sure to place your hand under one of the wheels and pull it outwards.

This will help prevent it from getting stuck when folding or transporting your scooter. The Scooter Is Now Folded And Ready To Be Stored Away!

Congratulations! You have successfully folded your Gotrax scooter! Remember to follow these simple steps and your e-scooter will continue running optimally for years to come.

How To Unfold Gotrax Scooter?

Unfolding your Gotrax scooter is a breeze! Whether you’re a beginner or an expert on two-wheeled transportation, you’ll find that the Gotrax scooter is easy to set up and use.

To begin, make sure the scooter is in its folded position. Then, hold the handlebars with one hand and press down on the lever at the base of the stem with your other hand.

This will cause the stem to extend, and the handlebars to drop down. Once the handlebars are in position, press down on the lever again to lock them in place.

Now, pull up on the scooter’s kickstand. This will cause it to extend and lock into place, allowing you to stand up your Gotrax scooter.

Here are the simple steps to unfold the Gotrax scooter:

Press The Quick-release Button

To unfold the Gotrax scooter, you’ll first need to press the quick-release button located on the handlebars. This will cause the stem to retract and the handlebars to drop down.

Extend The Stem

Now, extend the stem by pressing down on it with your hand. This will cause the scooter to unfold.

Lock The Handlebars

Once the stem has fully extended, be sure to lock the handlebars in place by pressing down on the lever at their base.

Release The Fender Clip

Next, release the fender clip located on the bottom of the scooter. This will allow the kickstand to extend and lock into place.

Stand Up The Scooter

Now that the Gotrax scooter is folded and unfolded, you’re ready to ride! Simply stand up the scooter and enjoy your new mode of transportation.

Put The Kickstand On And Then Lift Up The Deck

To do this, make sure to stand next to your board with the kickstand facing away from you. Once in position, press down on the kickstand and then firmly press down on the nose of the board until it lifts up off the ground.

Holding the board at the nose, slowly and carefully push the kickstand into place. You should hear a click when it is fully engaged.

Once this is done, you can now start skateboarding! Just remember to always put on the kickstand before lifting up your board.

Make Sure The Handlebar Stem Is In Locked The Right Position:

When folding or unfolding the Gotrax scooter, be sure to make sure the handlebar stem is in the locked position. This will help prevent it from getting damaged.

Pull Up The Handlebars To Snap Them Into Place:

First, make sure the handlebars are the right size for your frame. Then, attach the handlebars to the steerer tube of your bicycle.

Make sure the handlebars are firmly secured with the bolts provided. After the handlebars are in place, pull up the handlebars to snap them into place.

This will ensure they are securely locked onto the frame. Finally, make sure the front wheel is centered and that the handlebars are positioned in a comfortable riding position.

Once everything is adjusted, you’re ready to go! Installing handlebars can be a fun and simple process that will help you get the most out of your bike rides.

Summing Up: How To Fold Gotrax Scooter?

How To Fold Gotrax Scooter? Folding a Gotrax scooter is an easy process that can be done in just a few simple steps. Taking the time to properly fold your scooter will keep it in good condition and make it easier to store or transport.

Make sure to familiarize yourself with the type of scooter you have so that you can easily reference the instructions if needed. Before each use, always ensure that all parts are secure and double-check the brake to make sure it’s working properly.

FAQs