How To Fold A Razor Scooter? [Expert Tips!]


How To Fold A Razor Scooter

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Electric Razor Scooters are a convenient way to get around, but before you can use one, you need to fold it up. Here’s a quick guide on how to fold your Razor scooter. The Razor scooter folds easily for storage and transportation.

How To Fold A Razor Scooter? Lay the razor scooter on its side so that the wheel is facing up. Fold the top of the scooter down so that it covers the wheel. Pin it in place with your fingers.

Fold the bottom of the scooter up so that it covers the wheel and pin that in place as well. Make sure that all of the edges are tucked in tightly, and then use a straight edge or ruler to make sure everything is symmetrical and even.

Use a hammer to strike one end of each hinge until they break (the hinges should now be folded into themselves). Repeat steps 2-4 on the other side of your razor scooter, making sure to reverse all of the hinges as you go so that they open outwards when you’re done.

How To Fold AN Electric Razor Scooter?

If your electric razor scooter is foldable by hand, first make sure that the handle bars are locked in place. Next, unfold the handle bars. Grab one end of the bar and fold it towards the other end until it meets in the middle.

If your electric razor scooter is not foldable by hand, then you’ll need to find a way to lock the handle bars in place so that they don’t move while you’re folding them up. You can use a strap or clamp.

When it comes to folding a razor scooter, there are a few simple steps that you can follow.

Locate The Hinge Of Your Razor Scooter:

The hinge of a razor scooter is typically on the bottom of the scooter. If you cannot locate the hinge, try turning the scooter over and looking for screws or a peg that may hold it in place.

Open Your Scooter:              

Open your scooter. The first thing that you will need is a screwdriver. You will also need to remove the handlebars from your scooter. Once the handlebars are removed, you will then be able to fold the scooter in half by pulling on each side of the frame.

Make sure that you line up the notches in the frame so that it is perfectly folded. After folding the scooters in half, place it onto its wheels and screw it back together.

Slide Out The Grips:

Next you have to remove the grips. There are two screws on each side that hold them in place. Once they’re removed, just slide them out. Be sure to keep the orientation of the grips as they slide out, or else you’ll have to re-assemble them correctly. 

Now you can fold the scooter up by first pressing down on one end and then pulling it towards you. Make sure that the blade is facing down when you do this, or else it will be difficult to put back together.

Slide Down The T-tube:

Now just slide down the T-tube until it rests on the ground. This gives you a stable base for your scooter, and makes it easier to store.

Open The Hinge Of Your Razor Scooter:

Next open the hinge of the scooter and fold it in half. Next, bring the folded end up to meet the other end and hold on to both. Then, twist the two ends together until they lock into place.

Fold Down The Tires:          

There are a few different ways to fold down the tires of a razor scooter. One way is to fold them in half, so that the tire is on top of the rim.

Another way is to fold them in thirds, so that the tire is at the center of the rim. Finally, you can fold them down so that they are almost touching the ground.

Flip Up The Handlebars:           

To start, locate the two screws that hold down the handlebars. Remove these screws by unscrewing them using a Phillips head screwdriver. Now, fold down each handlebar so that they are at their lowest point and clamped between your hands. 

Next, reattach the screws by threading them back through the holes and screwing them back in place. Be sure to tighten these screws evenly to ensure that your scooter remains stable during use.

Wrap The Hinges Around Each Other Until They Meet At The Center Of Your Razor Scooter:

With your folded razor scooter in hand, it’s time to wrap the hinges around each other until they meet at the center of your device.

You may want to start by folding one of the long sides in towards the middle, then fold up the remaining length of that side. Next, do the same thing with the other side. 

Now that you have your two folded sides together, it’s time to connect them. The easiest way to do this is to wrap one of the hinges around both of the folded sides and tuck it underneath. Then repeat with the other hinge.

Swing The Seat Arms Outwards:

Swing the seat arms outwards to open the scooter up for storage or transport. This will also help you balance the scooter when folded.

Fold One End Of Your Razor Scooter Over The Other End:

When folding a razor scooter, it is important to remember that the fold should be done over the “flat” side of the scooter. Doing so will help keep your scooter looking its best and minimize defects in the paint.

Once you have folded one end over, make a small hole in the middle and insert your thumb. Now give the folded section a tight squeeze, ensuring that the hole is completely sealed. Finally, fold up the other end of your scooter similarly.

Flip Your Razor Scooter Upright So That It Is Standing On Its Own Two Feet:

When folding the razor scooter up, it is important that you flip it upright so that it is standing on its own two feet. This makes it easier for you to transport and store. Once folded up, just make sure that the handle bars are facing outwards so that they don’t get in the way when you’re riding.

Lift Up The Wheels And Lower Them Into Place:

The first thing you’ll want to do is lift up the front wheels off the ground. You can do this by grasping the spokes near the front wheel and pulling up. Once the front wheel is off the ground, you can lower it into place by pushing down on it until it touches the ground.

Make sure to line up the holes in the rear wheel with those on the frame so they’re properly aligned before you push down on them to secure them.

Store Your Folded Razor Scooter Away In A Corner Or Closet Where It Is Easy To Access:

If you want to keep your folded razor scooter safe and easy to access, you can store it in a corner or closet. Make sure that the foldable razor is well-secured so that it does not get damaged or lost.

How To Fold A Razor Scooter In Half?

When folding a razor scooter, take care to fold the frame in half from front to back, then tuck the handlebars in. Next, fold the front wheel in half and tuck it between the handlebars and the frame. Finally, fold up the back wheel and secure it with a zip tie.

How To Fold A Razor Scooter Down?

Razor scooters are made up of two lightweight metal frames that are attached by a hinge at the front. To fold a razor scooter down, first remove the handlebars by unscrewing them from the frame.

Next, fold the front of the frame down so that it is flush with the ground. Finally, screw in the handlebars and you’re ready to go.

How To Fold A Razor A5 Scooter?

There are a few different ways to fold a razor A5 scooter. One way is to unfold it completely, line up the handlebars, and fold the front wheel in towards the center of the scooter. Make sure the front wheel is tucked in so it doesn’t touch the ground.

Then fold up one side of the frame until it meets the top edge of the handlebars, and do the same with the other side. Make sure both handles are secure before folding down any excess fabric.

Watch The Video: How To Fold A Razor Scooter?

Final Words: How To Fold A Razor Scooter?

Knowing how to fold a Razor scooter is not only a great way to save space, but it can also be a lifesaver. If you ever find yourself in a tight spot, being able to quickly fold up your scooter can be a real lifesaver. So, next time you’re headed out for a ride, make sure you know how to fold up your Razor scooter just in case.


Does The Razor Electric Scooter Fold Up?

Yes, the razor electric scooter folds up for storage. Be sure to tighten all of the bolts and cables before storing your scooter.

How Do You Fix A Razor Scooter That Won’t Unfold?

If your razor scooter is not unfolding or unfolding slowly, there are a few things you can do to troubleshoot and fix the issue. First, make sure that the hinge is tight and that the screws are properly tightened. If these steps do not solve the issue, you may need to replace the hinge or the screws.

How Do You Open An Electric Scooter?

If you have an electric scooter, you’ll need to know how to open it. The first thing you’ll want to do is find the key. There is usually a keyhole on the side of the scooter and sometimes there is a label that says “Key” or “Lock.”
If there isn’t a label, look for something that looks like a small knob. Once you’ve found the key, use it to open the lock. Afterward, just fold up the scooter and take it with you!

How Do You Open A Foldable Scooter?

If you have a foldable scooter, you may be wondering how to open it. Here are the steps: 
Locate the release button on the handlebar or near the wheels. Push down on the release button until it pops out of its hole. 
Lift up on one end of the handlebar and pull it out of its mountings. The other end should also come free after a few twists. Open the scooter by unfolding it in its entirety and placing it on its wheels.

About the author

Latest posts