How To Barspin On A Scooter? (Answered!)


How To Barspin On A Scooter

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Learning to barspin on a scooter is a great milestone for any rider looking to take their skills up a level. This trick is both stylish and impressive, and mastering it requires practice, patience, and an understanding of proper technique.

Bar spinning on a scooter is an exciting and exhilarating skill that allows riders to perform stunts and tricks on their vehicles. It is a great way to show off your skills and impress your friends.

With a bit of practice, anyone can learn to barspin on a scooter, and it doesn’t take too long for a rider to master the basics.

This article will provide a step-by-step guide on how to barspin on a scooter, including the basics, the proper technique, and some tips to help you get started. So, if you’re ready to learn how to do a barspin on a scooter, let’s get started!

How To Barspin On A Scooter?

It involves counterweighting the scooter, with the rider leaning in the opposite direction of the turn that is initiated. The rider then applies pressure to the handle bars, allowing them to spin as the body weight shifts back in line with the turn.

What Is A Barspin On A Scooter?

A barspin on a scooter is a trick where the rider rotates the handlebars a full 360 degrees in the air, resulting in a spin.

This trick requires the rider to have good balance, so it is best that they are comfortable with basic scooter maneuvers before attempting it.

How to Barspin on A Scooter for Beginners?

The barspin is a complex trick in scootering which requires a high level of technical skill and body control.

This trick involves the rider’s ability to rotate the handlebars 360 degrees around their own axis, while maintaining control of their scooter.

This is achieved by initiating a jump while simultaneously completing a half-turn of the handlebars, using the momentum from the jump to spin them further.

Here Are Simple Steps to Follow to Do Barspin on Your Scooter:

Choose The Correct Scooter:

Bar spinning requires a scooter with strong and reliable handlebars, good stability, and a sturdy frame. If a scooter is not able to handle the bar spin, it could cause serious injury or damage to the scooter and rider.

Ensure that the scooter you choose has all of these features in order to perform a barspin successfully.

Adjust Your Bar To Fit The Scooter:

The bar should be set at a height that allows the rider to comfortably reach the ground with their feet when seated on the scooter. Additionally, the bar should be centered between the two wheels.

Practice Spinning The Bars On The Ground:

Begin by practicing the motion of a bar spin while your scooter is still on the ground. After getting used to the motion, gradually increase your speed and attempt to spin the bars around one full rotation.

It may take some practice, but once you master the correct timing and speed, you will be able to successfully attempt a bar spin on a scooter.

Don’t Let Go Of The Bars Completely, Simply Pass Your Bars:

Not to let go of the bars completely when performing this trick. Instead, simply pass your bars with your body in order to complete the spin.

If done correctly, the rider should be able to spin a full 360 degrees and land back on the scooter with ease.

Start Riding Along The Ground At A Comfortable Speed:

Start off by riding along the ground at a comfortable speed. You should feel in control and be able to move your feet freely while riding.

Once you are confident on your scooter, you can begin to practice the barspin.

Jump As High As You Can:

The key to a successful barspin on a scooter is to jump as high as possible when you approach the scooter. By doing this, you will create enough momentum to spin the handlebars one full rotation.

Before jumping, it is important to keep your arms loose and your body relaxed, as this will enable you to rotate more freely.

Additionally, try to keep your hands close together and press down on the handlebars with equal force in order to maintain balance throughout the rotation.

Lean Forward And Move Your Bodyweight Forward:

This will help you generate enough momentum to spin the handlebars around. When doing this trick, you also want to keep your arms straight and your shoulders back, as this will help you stay balanced.

Once you have leaned forward and moved your bodyweight forward, use your legs to push off the scooter while simultaneously kicking the handlebars with your feet.

Shift Your Weight Backward As You Push Yourself Off The Ground:

Shift your weight backward as you push yourself off the ground, this will help you gain momentum as you spin.

Next, bring your feet up in front of you and hold onto the scooter handlebars. Finally, use your body weight to turn the scooter and land back on the ground.

Keep A Firm Grip On The Handlebars:

Keep a firm grip on the handlebars while moving your bodyweight forward. This helps to provide stability and control as you spin the handlebars.

Additionally, ensure that your arms are slightly bent while spinning, and use your legs to provide momentum and help you rotate around the handlebars.

Keeping Your Handlebars Underneath You, Let Go Of The Bars At About 1/4 Of The Way Around:

Keep your handlebars underneath you and let go of the bars at about two-thirds of the way around.

To execute a barspin, start by accelerating on a flat surface and quickly jump into a manual. Then, pull the bars up and back towards your chest while keeping your legs extended.

Spin Your Bar Around More Than Once To Do A Double Barspin:

To do a double barspin, you need to spin the handlebar around more than once. The trick can be done from a standing position, or from a jump.

To get started, you need to ensure that your grip is secure and that you have the right setup for your scooter.

Catch The Grip With Your Catching Hand:

The key to successfully completing a barspin on a scooter is to make sure you have a strong grip on the handlebars with your catching hand.

Ensure that your dominant hand is firmly gripping the throttle while keeping it steady and controlling the speed of the scooter.

With both hands securely in place, use your dominant hand to forcefully pull up on the handlebars while pushing down with your catching hand to complete the spin.

Get Both Hands Back On The Grips And Balance Yourself:

The last step to barspin on a scooter is to get both hands back on the grips and balance yourself. This is an essential skill for any scooter rider, as it helps to maintain control of the scooter and protect against any potential accidents.

Watch Video: How To Barspin On A Scooter?

How to 180 Barspin on A Scooter?

To initiate this sophisticated trick, the rider must first generate sufficient linear momentum by propelling themselves forward with forceful leg thrusts.

Concurrently, they must manipulate the handlebars in such a way as to induce precession, whereby the angular momentum is redirected along a different axis.

This intricate interplay between linear and angular motion serves to set the stage for executing the subsequent rotational component.

As the rider reaches the apex of their jump or transition, they must swiftly utilize their upper body strength and agility to execute a 180-degree spin around either the X or Y axis.

In order to maintain balance throughout this rotation, it is crucial for them to maintain constant proprioceptive awareness and fine-tune their muscle adjustments accordingly.

Simultaneously, they must carefully manipulate the position and orientation of the handlebars using precise hand gestures, ensuring that they complete a full revolution during their airtime without compromising stability upon landing.

Conclusion: How To Barspin On A Scooter? 💭

Learning how to barspin on a scooter takes practice, patience and most importantly the right technique.

With this guide, you can learn the basics of how to barspin, from proper body positioning and foot placement to timing your rotation and landing safely.

Remember that practice makes perfect, so continue working on the technique until you get it right. By following these steps, you’ll be able to show off your moves like a pro in no time.


How To Do A 360 Barspin On A Scooter?

To do a 360 barspin on a scooter, you’ll first need to lean back and pull up on the bars. This will cause your scooter to lift into the air.
As the handlebar spins around, have your catching hand ready to grab underneath the bars as they spin.

How To Do A Half Barspin On A Scooter?

A half barspin is a variation of the classic barspin. Instead of spinning the handlebar all the way around, you’ll only do half of the rotation.
To do a half barspin, lean back and pull up on the bars, then let go as the handlebar starts to spin.

How To Do A 360 Barspin On A Scooter Flat?

If you want to do a 360 barspin on a scooter flat, you’ll need to have your scooter setup in the same way as for a regular barspin.
However, instead of leaning back and pulling up on the bars, you’ll need to jump off of the scooter and hold onto something while it’s in midair.
From there, lean back and pull up on the bars as it lands.

How To Barspin Dirt Jumper?

If you’re looking to do a barspin on a dirt jumper, you’ll need to have your scooter setup in the same way as for a regular barspin.
However, instead of leaning back and pulling up on the bars, you’ll need to jump off of the scooter and hold onto something while it’s in midair.
From there, lean back and pull up on the bars as it lands.

About the author

Latest posts